1, balancing machine in the use of the process, to try to reduce the tire and the balance machine shaft touch, avoid the balance machine shaft change. Balancing machine in the moving time, also do not move the shaft, avoid the balance machine shaft deformation;

2, the balance machine is mainly composed of circuit boards, so it is necessary to do a good job in the balance machine anti-tide operation, especially in the summer rain more;

3, avoid the balance machine is not used, placed for a period of time, direct power use, this will be because the balance machine circuit board moisture, resulting in power board or computer board burning; In this case, the power supply board and computer board inside should be removed, dried with a hair dryer, and then put in a cool and ventilated place for a few days, and then connected with the use;

4. It is necessary to clean up the dust on the power board and computer board to avoid the moisture adsorption in the air on the dust, forming a short circuit, leading to the power board or computer board burning; When cleaning flanges, screws and bearings, neutral washing liquid should be used to clean them;

5. Always pay attention to check whether the line of the balancing machine is loose;

6, in the balance machine box is connected with a ground wire, to avoid the balance machine leakage;

7, every period of time to let the manufacturer's personnel to carry out precision calibration.